Car heating warm-up system for BMW 7 (E32) 01.1987 - 01.1994
Car heating warm-up system for BMW 7 (E32)
- Standard catalogue
- New catalog (5 products)
Power:
Dimensions:
Lenght:
All filters
Power consumption:
Connector diameter:
5 products more in new catalogue
NB! 5 more products found in the new catalog
Results found: 10
ENGINE HEATER TT-THERMO 1000XC ( READY-TO-INSTALL)
Item code:
AL51314717
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
157.50-12%137.84 eur -
-
157.50 - Price with discount
- 137.84 eur
-
- You save 19.66 eur (-12%)
-
- in the store
- 2 pcs
-
date of dispatch:
30.05.2024, 18:00
- Add to cart
READ MORE
-Heater intended for 4-6 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
Splashproof connection cable
Item code:
AL14332844
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
29.33-13%25.46 eur -
-
29.33 - Price with discount
- 25.46 eur
-
- You save 3.87 eur (-13%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
30.05.2024, 18:00
- Add to cart
Connector: |
|
Current: |
Max 16A
|
Lenght: |
1,5M
|
Voltage: |
AC 220-240 V
|
READ MORE |
DEFA PlugIn connectors do not require any tools to make a safe connection. Therefore, you can install them without the help of a qualified electrician.
cable 1.5m
Defa compatible heating cable - Locking fork connection
Item code:
AL33773500
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
37.50 eur
- Price: 37.50 eur
-
- can be ordered
- 5 pcs
-
date of dispatch:
30.05.2024, 18:00
- Add to cart
READ MORE
Defa compatible instrument socket / element cable - Defa compatible heating cable - Locking fork connection
ENGINE HEATER TT-THERMO 500XC ( READY-TO-INSTALL)
Item code:
AL73974230
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
138.75-12%122.29 eur -
-
138.75 - Price with discount
- 122.29 eur
-
- You save 16.46 eur (-12%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
30.05.2024, 18:00
- Add to cart
READ MORE
-Heater intended for 1-3 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1000XC
Item code:
AL33724026
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
149.17-14%128.29 eur -
-
149.17 - Price with discount
- 128.29 eur
-
- You save 20.88 eur (-14%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
30.05.2024, 18:00
- Add to cart
Power: |
1000 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Pump throughput capacity: |
8 l/min
|
Power consumption: | ALL PROPERTIES |
Power consumption: |
4,3 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
READ MORE |
A device that allows you to warm up the engine without starting it. Designed to preheat the engine, to facilitate starting the engine in cold weather and, in some cases, to warm the air in the vehicle cabin.
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1000 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC ( READY-TO-INSTALL
Item code:
AL51314719
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
155.83-12%136.38 eur -
-
155.83 - Price with discount
- 136.38 eur
-
- You save 19.45 eur (-12%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
30.05.2024, 18:00
- Add to cart
READ MORE
-Heater intended for 6+ cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC
Item code:
AL30750421
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
157.17-12%138.69 eur -
-
157.17 - Price with discount
- 138.69 eur
-
- You save 18.48 eur (-12%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
30.05.2024, 18:00
- Add to cart
Power: |
1500 W
|
Dimensions: |
151 mm x 90 mm x 75 mm
|
Lenght: |
151 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Weight: | ALL PROPERTIES |
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
READ MORE |
The genuine and original TT-Thermo engine heater is suitable for almost all motor vehicles!
New generation hose heater with circulating water pump. Power 1500W
Externally more compact in size than previous Kld2 models
Our only model that is completely free to install in any position. No limited mounting angle or position
The resistors inside the heat exchanger are not directly in the liquid, so the resistors do not burn from the air bubbles in the system
Pump bearings reinforced and improved
Improved pump performance
All experiences of previous models have been taken into account in the design
Higher quality materials and components
Designed in Finland
Defa compatible connector
Hose outlet diameter 17mm
You can find the hose bends that may be needed for installation in our online store
Forget the inefficient engine heater!
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 18mm
Item code:
AL51314701
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
164.83 eur
- Price: 164.83 eur
-
- can be ordered
- 5 pcs
-
date of dispatch:
30.05.2024, 18:00
- Add to cart
READ MORE
Designed for large machines such as work vehicles, trucks, etc.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 20mm
Item code:
AL35880284
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
188.33-5.9%177.21 eur -
-
188.33 - Price with discount
- 177.21 eur
-
- You save 11.12 eur (-5.9%)
-
- can be ordered
- 5 pcs
-
date of dispatch:
30.05.2024, 18:00
- Add to cart
READ MORE
A new generation hose heater with a circulating water pump. Power 2200W, adjustable angle in connection.
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
Cable Set, interior heating fan, (engine preheating system) DEFA 460803
Item code:
AL22971649
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
79.34-34%52.26 eur -
-
79.34 - Price with discount
- 52.26 eur
-
- You save 27.08 eur (-34%)
-
- can be ordered
- 1 pcs
-
date of dispatch:
30.05.2024, 18:00
- To the new catalogue
See item information in the new catalogue
Cable Kit, engine preheating system DEFA 460785
Item code:
AL12650829
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
78.56 eur
- Price: 78.56 eur
-
- can be ordered
- 5 pcs
-
date of dispatch:
30.05.2024, 18:00
- To the new catalogue
See item information in the new catalogue
Cable Kit, engine preheating system DEFA 460785
Item code:
AL22971655
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
110.66 eur
- Price: 110.66 eur
-
- can be ordered
- 2 pcs
-
date of dispatch:
30.05.2024, 18:00
- To the new catalogue
See item information in the new catalogue
ENGINE HEATER TT-THERMO 1500KLD
Item code:
AL14332360
-
We deliver to
United StatesWe can deliver this product to United States and other countries. You can see delivery price in the shopping cart.
We have various delivery options to United States. You can see delivery date and cost in the shopping cart.
You can track your package with a dedicated tracking link that you'll receive immediately after paying for your order. -
117.50 eur
- Price: 117.50 eur
- in suppliers stock: NOT AVAILABLE
Fluid: |
Coolant, Glycol - G11, G12
|
Power cord: |
DEFA compatible cables
|
Power: |
1500 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: | ALL PROPERTIES |
Connector diameter: |
⏀16 mm -⏀17 mm
|
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
READ MORE |
installation options than the model with a direct hose connection. The connection of the heater to the electricity network is
With a connector compatible with the Defa system. If the need for installation length to the one in the car
to the electric cable system is long, we also have Defa-compatible armored 1.5m available separately
long extension cord.
The operating principle of the heater is simple: it simultaneously heats and circulates the coolant
in the engine. Therefore, the engine heats up evenly everywhere and the vehicle's interior quickly when the vehicle is started.
Thanks to the even heating of the engine, the heater is also excellently suitable for new vehicles that do not
can use a traditional block heater.
The heater is easy to install and reliable. In general, the best place for installation is the water hose between the engine and the interior heater. The heater has a built-in thermostat that keeps the temperature at +65..+75
degree. The pump circulates the heated liquid all the time. In this way, the heat is efficiently transferred to the engine. Thanks to the thermostat, the heater can be turned on without the risk of overheating.
Delivery includes: Engine heater with Defa-compatible connector, water hose clamps, installation and user manual in Finnish.
Deliveries directly from the warehouse of the importer Suomen Tuontiekniikka Oy. Delivery time 2-5 days.
The heater is CE-marked and has a 1-year warranty from the date of purchase.
Technical information:
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 6.2 A
Power cord Defa compatible cables
Pump capacity 8 l/min
Fluid Coolant, Glycol - G11, G12
Dimensions 150 mm x 90 mm x 80 mm
Weight 880 g (without power cord)
Connections Ø 16 mm – shoulder Ø 17 mm
Hoses Internal diameter
Ø 16 mm – 20 mm
All parts for BMW 7 (E32)
- Lighting
- Main headlamp
- Tail lightNEW!
- Side flasher
- Number plate light
- Front flasher
- Headlamp lens
- IndicatorNEW!
- Bulb, door puddle lightNEW!
- Headlamp motorNEW!
- Cable Repair Set, headlightNEW!
- Marker LightNEW!
- Parking lampNEW!
- Bulb, reading lightNEW!
- Interior LightNEW!
- Outer headlampNEW!
- Marker LampNEW!
- Housing, headlightNEW!
- Main headlamp insert
- Bulb
- Universal tail light
- Mirrors and connected parts
- Braking systems
- Brake padsNEW!
- Brake discNEW!
- Repair Kit, brake caliperNEW!
- Brake CaliperNEW!
- Brake shoes kit, drum brakesNEW!
- Cable, parking brakeNEW!
- Guide Sleeve Kit, brake caliperNEW!
- Brake HoseNEW!
- Repair kit, brake pads
- Brake Master CylinderNEW!
- Brake shoes repair kitNEW!
- Piston, brake caliperNEW!
- Brake Light SwitchNEW!
- Wear indicatorNEW!
- Repair Kit, automatic adjustmentNEW!
- Sensor Ring, ABSNEW!
- Repair Kit, brake master cylinderNEW!
- Brake Set, disc brakesNEW!
- Guide Sleeve, brake caliperNEW!
- Repair Kit, expanderNEW!
- Brake BoosterNEW!
- Bolt, brake caliperNEW!
- Anti-Squeal Foil, brake pad (back plate)NEW!
- Wear indicator
- Screw Set, brake discNEW!
- Cable, service brakeNEW!
- Brake Pressure RegulatorNEW!
- Steering parts
- Control arm
- Stabilizer linkNEW!
- Tie rod endNEW!
- Control arm silentblockNEW!
- Stabilizer mountNEW!
- Axial jointNEW!
- Steering rackNEW!
- Power steering pump - remanufacturedNEW!
- Repair Kit, wheel suspensionNEW!
- Steering gaiters setNEW!
- Anti-roll Bar Stabiliser KitNEW!
- Suspension repair kitNEW!
- Rod/Strut, wheel suspensionNEW!
- Mounting, differentialNEW!
- Centre Rod AssemblyNEW!
- Bearing Set, axle beamNEW!
- Hydraulic Hose, steering systemNEW!
- Mounting Kit, control leverNEW!
- Mounting, steering gearNEW!
- Joint, steering columnNEW!
- Idler ArmNEW!
- Mounting, axle beamNEW!
- Spring MountingNEW!
- Repair Kit, linkNEW!
- Expansion Tank, power steering hydraulic oil
- Suspension Sphere, pneumatic suspensionNEW!
- Control arm link
- Steering ArmNEW!
- Shaft Seal, power steering pumpNEW!
- Bush, steering control armNEW!
- Bush, steering arm shaftNEW!
- Suspension beam bush - kit
- Middle rod bushing
- Shock absorbers
- Shock absorberNEW!
- Coil springNEW!
- Top Strut MountingNEW!
- Shock absorber protection kitNEW!
- Bump stopNEW!
- Shock absorber's coverNEW!
- Spring CapNEW!
- Shock absorber top mounting
- Mounting Kit, shock absorberNEW!
- Suspension Sphere, pneumatic suspensionNEW!
- Suspension Kit, coil springs / shock absorbersNEW!
- Suspension setNEW!
- Input
- Electrical parts
- Spark PlugNEW!
- Abs sensorNEW!
- Fuel pumpNEW!
- Ignition coilNEW!
- Crankshaft position sensorNEW!
- Sender Unit, coolant temperatureNEW!
- AlternatorNEW!
- Lambda sensorsNEW!
- StarterNEW!
- Sender Unit, oil pressureNEW!
- Air flow sensorNEW!
- Boost pressure sensorNEW!
- Ignition cablesNEW!
- Brake Light SwitchNEW!
- Alternator RegulatorNEW!
- Switch, reverse lightNEW!
- Temperature Switch, radiator fanNEW!
- Distributor CapNEW!
- Rotor, distributorNEW!
- Sender Unit, intake air temperatureNEW!
- Sensor, exterior temperatureNEW!
- Knock SensorNEW!
- Idle speed controlerNEW!
- Potentiometer throttle valveNEW!
- Multifunctional RelayNEW!
- AerialNEW!
- Sensor, speedNEW!
- Sensor, oil temperatureNEW!
- Solenoid Switch, starterNEW!
- Freewheel Gear, starterNEW!
- Flasher UnitNEW!
- Level Control Switch, windscreen washer tankNEW!
- Plug, coilNEW!
- Water Pump, window cleaningNEW!
- Hazard Lights RelayNEW!
- Pinion, starterNEW!
- Ignition CableNEW!
- Bush, starter shaftNEW!
- Air HornNEW!
- RPM Sensor, engine managementNEW!
- Air Flow SensorNEW!
- Switch, brake actuation (engine timing)NEW!
- Aerial HeadNEW!
- Relay, central locking systemNEW!
- Plug, spark plugNEW!
- Repair Kit, distributorNEW!
- Collector End Shield Bush, starterNEW!
- Adapter, lambda sensorNEW!
- Plug, distributorNEW!
- Pressure Switch, brake hydraulicsNEW!
- Assortment, plug housings
- Battery booster/Jump starter
- Battery charger
- Battery testers & chargers
- Car battery
- Electrical appliances
- Fuses set
- Inverter
- Jumper cables
- Sender Units/ Sensors
- Thermical parts
- ThermostatNEW!
- Radiator
- Water PumpNEW!
- Interior blower
- AC condenserNEW!
- Radiator HoseNEW!
- Radiator cap
- Expansion tank
- Heat blower controller
- AC compressorNEW!
- Radiator fan
- Heater
- Temperature Switch, radiator fanNEW!
- Thermostat bracketNEW!
- Oil cap
- Thermostat HousingNEW!
- Coolant TubeNEW!
- DrierNEW!
- Control Valve, coolantNEW!
- Viscous clutch
- EvaporatorNEW!
- Pressure Switch, air conditioningNEW!
- Gasket, thermostatNEW!
- Expansion valveNEW!
- Level sensorNEW!
- Heater hoseNEW!
- Seal, EGR valveNEW!
- Gasket, water pumpNEW!
- Gasket, coolant flangeNEW!
- Driven Plate, magnetic clutch compressorNEW!
- Fan wheel
- AntifreezeNEW!
- Heating Element, engine preheater systemNEW!
- High Pressure Line, air conditioningNEW!
- Connector, pipesNEW!
- Gasket, heater flap boxNEW!
- Seal, coolant pipeNEW!
- Breather Hose, expansion tankNEW!
- Plug Screw, coolant lineNEW!
- Air conditioning bearing
- Condensed Water Drainage Hose, interior air filter housingNEW!
- Oring set
- R134a
- Engine
- Oil Drain Plug, oil panNEW!
- Gasket, cylinder head coverNEW!
- Gasket, cylinder headNEW!
- Shaft Seal, crankshaft, Shaft Seal, camshaftNEW!
- Gasket Set, cylinder headNEW!
- Bolt Kit, cylinder headNEW!
- Timing Chain KitNEW!
- Gasket, intake manifoldNEW!
- Gasket Set, cylinder head coverNEW!
- Gasket, exhaust manifoldNEW!
- Piston Ring KitNEW!
- Oil DipstickNEW!
- Gasket, wet sumpNEW!
- Seal Set, valve stemNEW!
- Exhaust ValveNEW!
- Hose, crankcase breatherNEW!
- Big End BearingsNEW!
- Valve, engine block breatherNEW!
- Inlet ValveNEW!
- Gasket Set, crank caseNEW!
- Main Bearings, crankshaftNEW!
- Intake Hose, air filterNEW!
- Rocker/ TappetNEW!
- SumpNEW!
- Full Gasket Set, engineNEW!
- Seal, valve stemNEW!
- Seal, oil filter housingNEW!
- Valve GuidesNEW!
- Timing ChainNEW!
- Gasket, intake manifold housingNEW!
- Tensioner, timing chainNEW!
- Gasket, thermostatNEW!
- Finger Follower, engine timingNEW!
- Oil Trap, crankcase breatherNEW!
- Hose, cylinder head cover breatherNEW!
- CamshaftNEW!
- Seal, oil filler capNEW!
- Accelerator CableNEW!
- Shaft Seal, camshaftNEW!
- Conrod Bearing SetNEW!
- PistonNEW!
- Chain, oil pump driveNEW!
- Rocker Arm, engine timingNEW!
- Gasket, timing caseNEW!
- Guides, timing chainNEW!
- Crankshaft Bearing SetNEW!
- Gear, crankshaftNEW!
- Seal, crankcase breatherNEW!
- Gasket, block cover (crankcase)NEW!
- Cylinder Head BoltNEW!
- PipeNEW!
- Adjusting Disc, valve clearanceNEW!
- Frost PlugNEW!
- Gear, camshaftNEW!
- Small End Bushes, connecting rodNEW!
- Ring Gear, crankshaftNEW!
- Seal Ring, cylinder head cover boltNEW!
- Seal, oil strainerNEW!
- Shaft Seal, camshaftNEW!
- Rocker Arm Set, engine timingNEW!
- Seal Ring, O-Ring, cylinder linerNEW!
- Housing Cover, crankcaseNEW!
- Non-return ValveNEW!
- Flywheel BoltNEW!
- Gasket Set, timing caseNEW!
- Seal Ring, oil pressure regulating valveNEW!
- Centering Bush, propshaftNEW!
- Starter Bush, clutch housingNEW!
- Seal Ring, oil outlet (charger)NEW!
- Bolt, rocker arm shaftNEW!
- Seal, timing chain tensionerNEW!
- Seal Ring, timing chain tensionerNEW!
- Thrust Piece, in-/outlet valveNEW!
- Counternut, valve clearance adjusting screwNEW!
- Guide Lining, timing chainNEW!
- Bearing, crankcase vent valveNEW!
- Drive system parts
- Wheel bearing kitNEW!
- CV-jointNEW!
- Axle shaftNEW!
- CV-joint bootNEW!
- Shaft Seal, differentialNEW!
- Seal, drive shaftNEW!
- Bearing, propshaft centre bearingNEW!
- Shaft Seal, wheel hubNEW!
- Shaft Seal, manual transmissionNEW!
- Axle Nut, drive shaftNEW!
- Shaft Seal, manual transmission flangeNEW!
- Joint, steering shaftNEW!
- Mounting, transfer gearNEW!
- Oil Seal, automatic transmissionNEW!
- Cap, wheel bearingNEW!
- Bearing, selector-/shift rodNEW!
- Oil, all-wheel-drive couplingNEW!
- Universal JointNEW!
- Holder, propshaft centre bearingNEW!
- Gas springs
- Car interior equipment
- Exhaust System
- End SilencerNEW!
- Middle SilencerNEW!
- Gasket, exhaust pipeNEW!
- Rubber Strip, exhaust systemNEW!
- Clamp, exhaust systemNEW!
- Seal, exhaust pipeNEW!
- Rubber Buffer, silencerNEW!
- Bracket, EGR valveNEW!
- Spring, silencerNEW!
- Nut, exhaust manifoldNEW!
- Mounting Kit, silencerNEW!
- Mounting Kit, exhaust systemNEW!
- Clamp, silencerNEW!
- Vacuum Control Valve, EGRNEW!
- Clamps and mounting parts
- Work-shop equipment
- Other
- Gasket / SealNEW!
- Wedge Unit, drum brakeNEW!
- Engine OilNEW!
- WindscreenNEW!
- Holding BracketNEW!
- Slack AdjusterNEW!
- Side WindowNEW!
- Rear WindscreenNEW!
- Spacer RingNEW!
- Mounting Kit, ignition control unitNEW!
- Automatic Transmission OilNEW!
- Pressure Controller, fuel pumpNEW!
- Automatic Transmission OilNEW!
- Bush, connecting rodNEW!
- Control LampNEW!
- Relay, ABSNEW!
- Reflector, headlightNEW!
- Gas Spring, seat adjustmentNEW!
- Accessory Kit, rocker armNEW!
- Cable, automatic transmissionNEW!
- Pitman ArmNEW!
- Pressure Accumulator, brake systemNEW!
- Ball Stud, tie rodNEW!
- Insert, spotlightNEW!
- Buffer, oil pan mountingNEW!
- Air/Electric Horn
- Air/Electric HornNEW!
- Battery Post Clamp
- Carry Case
- Cover, battery post clamp
- Earth Cable, distributor
- Hand Feed Pump
- Miscellaneous
- Vehicle combination paint
- Wire Brush, battery post/clamp cleaning
- Heating systems
- Auto chemicals
- Universal bearings
- Chemistry and cosmetic care products
- Accessories
- Accessories
- Accessories for mobile phones
- BOOSTER, Emergency Aid - Battery Bank
- Band hawser
- Car flags
- Car seat covers
- Children's goods
- Cigarette Lighter
- Clamps and ties
- Covers for car documents
- Fan for car
- Fefrigerators and cooling boxes
- Fire extinguisher
- First aid kit
- Flashlights, lamps
- Ice scraper
- Indicators
- Inner tubes
- Insulating Tape
- Interior freshener
- Key Ring Set
- Lamps
- Lamps LED
- Lights XENON
- Mobile phone charger- powerbank
- Multimedia
- Parking assistant system
- Parking clock
- Petrol can
- Pets
- Radio
- Reflective plate
- Roof Box
- Roof Rack
- Rotating Beacon
- Rudder cover
- Safety Goggles
- Spade
- Sponge
- Sticker
- Stickers and car identification
- Tape
- Tint films for car
- Tow Ball Bracket , towbar
- Vacuum Cleaners
- Vehicle Washing Brush
- Warn jacket
- Warning triangle
- Winches
- Wipes
- You may also like
- Heating systems
- Car heating warm-up system
- Car heating warm-up system for BMW